深圳市谷科智电子有限公司

描述

The TPA2012D2 is a stereo, filter-free, Class-D audio amplifier (Class-D amp) available in a DSBGA or WQFN package. The TPA2012D2 only requires two external components for operation.

The TPA2012D2 features independent shutdown controls for each channel. The gain can be selected to 6, 12, 18, or 24 dB using the G0 and G1 gain select pins. High PSRR and differential architecture provide increased immunity to noise and RF rectification. In addition to these features, a fast start-up time and small package size make the TPA2012D2 class-D amp an ideal choice for both cellular handsets and PDAs.

The TPA2012D2 is capable of driving 1.4 W/Ch at

5 V or 720 mW/Ch at 3.6 V into 8 Ω. The TPA2012D2 is also capable of driving 4 Ω. The TPA2012D2 is thermally limited in DSBGA and may not achieve

2.1 W/Ch for 4 Ω. The maximum output power in the DSBGA is determined by the ability of the circuit board to remove heat. Figure 33 shows thermally limited region of the DSBGA in relation to the WQFN package. The TPA2012D2 provides thermal and short-circuit protection.

特性Output Power By Package:WQFN:2.1 W/Ch Into 4 Ω at 5 V1.4 W/Ch Into 8 Ω at 5 V720 mW/Ch Into 8 Ω at 3.6 VDSBGA:1.2 W/Ch Into 4 Ω at 5 V

(Thermally Limited)1.3 W/Ch Into 8 Ω at 5 V720 mW/Ch Into 8 Ω at 3.6 VOnly Two External Components RequiredPower Supply Range: 2.5 V to 5.5 VIndependent Shutdown Control for Each ChannelSelectable Gain of 6, 12, 18, and 24 dBInternal Pulldown Resistor on Shutdown PinsHigh PSRR: 77 dB at 217 HzFast Start-Up Time (3.5 ms)Low Supply CurrentLow Shutdown CurrentShort-Circuit and Thermal ProtectionSpace-Saving Packages2.01-mm × 2.01-mm NanoFree™ DSBGA (YZH)4-mm × 4-mm Thin WQFN (RTJ) With PowerPAD™